1. C. R. Yang, Y. Y. Lin, C. T. Lin, S. F. Tseng, " High-performance hybrid supercapacitors based on MXene/SnS2/CNT composites on nickel foam electrodes ", Chemical Engineering Journal, 520 (2025) 165826 (SCI) (JCR IF=13.2, Rank=8/175 (Q1)) (First author)
  2. C. R. Yang, J. G. Huang, M. J. Huang, H. Y. Shen, S. F. Tseng, "High-performance NO2 gas sensors based on vanadium metal organic frameworks (V-MOFs) on flexible graphene electrodes ", Journal of Alloys and Compounds, 1008 (2024) 176675 (SCI) (JCR IF=5.8, Rank=8/90 (Q1)) (First author)
  3. C. Cheng, T. P. Teng, and C. R. Yang, " Cooling benefit evaluation of a central processing unit using thermal interface materials with hybrid additives ", Journal of Mechanical Science and Technology, 38 (9) (2024) 5136-5145 (SCI) (JCR IF=1.5, Rank= 114/184 (Q3)) (Corresponding author)
  4. C. R. Yang , P. W. Cheng, S. F. Tseng, " Highly responsive and selective NO2 gas sensors based on titanium metal organic framework (Ti-MOF) with pyromellitic acid ", Sensors & Actuators: A. Physical 354 (2023) 114301 (8 pp) (SCI) (IF= 4.291, Rank= 15/64 (Q1)) (First author)
  5. C. R. Yang, Y. P. Chang, S. F. Tseng, " Synthesis of flower-like Mn-Co-MoS2 compounds for high-performance asymmetric supercapacitors", International Journal of Advanced Manufacturing Technology, 128 (2023 3661–3671 (SCI) (JCR IF=3.4, Rank=29/65 (Q2)) (First author)
  6. P. J. Wu, J. T. Hung, C. F. Hsieh, C. R. Yang, C. S. Yang, "High-selectivity terahertz metamaterial nitric oxide sensor based on ZnTiO3 perovskite membrane", APL Photonics, 8(10) (2023) DOI: 10.1063/5.0156772 (19 pp) (SCI) (JCR IF=5.6, Rank=14/100 (Q1)) (Corresponding author)
  7. C. R. Yang, Y. C. Li, C. H. Chen, C. T. Lin, J. Y. Lin, M. J. Huang, "Synthesis of dandelion-like bimetallic nickel cobalt metal-organic framework as an efficient cathode for high-performance asymmetric supercapacitors", Journal of Energy Storage, 72 (2023) 108663 (13 pp) (SCI) (JCR IF=9.4, Rank=19/115 (Q1)) (First author)
  8. C. R. Yang, L. J. Wang, and S. F. Tseng, "Arrayed porous polydimethylsiloxane/barium titanate microstructures for high-sensitivity flexible capacitive pressure sensors", Ceramics International, 48(9) (2022) 13144-13153 (SCI) (JCR IF=5.2, Rank=3/28 (Q1)) (First author)
  9. C. R. Yang , M. F. Lin, C. K. Huang, W. C. Huang, S. F. Tseng, H. H. Chiang, " Highly sensitive and wearable capacitive pressure sensors based on PVDF/ BaTiO3 composite fibers on PDMS microcylindrical structures", Measurement, 202 (2022) 111817 (SCI) (IF=5.131, Rank=17/92 (Q1)) (First author)
  10. C. Cheng, W. H. Shi, T. P. Teng, and C. R. Yang, "Evaluation of surfactants on graphene dispersion and thermal performance for heat dissipation coating", Polymers, 14(5) (2022) 952 (19 pp) (SCI) (JCR IF=4.329, Rank=18/90 (Q1)) (Corresponding author)
  11. C. R. Yang, C. T. Ko, S. F. Chang, and M. J. Huang, "Study on fabric-based triboelectric nanogenerator using graphene oxide/ porous PDMS as a compound friction layer", Nano Energy, 92 (2022) 106791 (SCI) (JCR IF=17.881, Rank=16/334 (Q1)) (First author)
  12. Z. Y. Chen, C. K. Huang, C. R. Yang, and S. F. Tseng, "Effects of hybrid surfactants on the quality and yield of graphene using a novel electrochemical-mechanical exfoliation process", International Journal of Advanced Manufacturing Technology, 119 (2022) 6809-6817 (SCI) (JCR IF=3.563, Rank=28/65 (Q2)) (Corresponding author)
  13. C. S. Yang, , Y. S. Cheng, Y. C. Hsu, Y. C. Chung, J. T. Hung, C. H. Liu, J. C. Hsu, C. Y. Chen, C. R. Yang, Y. T. Li , N. N. Huang, and T. R. Lin, "Hybrid graphene-based photonic-plasmonic biochemical sensor with a photonic and acoustic cavity structure", Crystals, 11 (2021) 1175 (SCI) (JCR IF=2.670, Rank=12/26 (Q2)) (SJR IF=0.459, Rank=130/338 (Q2))
  14. M. F. Lin, C. Cheng, C. C. Yang, W. T. Hsiao, and C. R Yang, "A wearable and highly sensitive capacitive pressure sensor integrated a dual-layer dielectric layer of PDMS microcylinder array and PVDF electrospun fiber", Organic Electronics, 98 (2021) 106290 (SCI) (IF=3.721, Rank=48/160 (Q2)) (Corresponding author)
  15. M. J. Huang, W. H. Chen, C. Cheng, S. R. Chen, J. Y. Lin, and C. R. Yang, "Integration of RuO2/conductive fiber composites within carbonized micro-electrode array for supercapacitors", Journal of Alloys and Compounds, 869 (2021) 159300 (SCI) (JCR IF=6.371, Rank=5/79 (Q1)) (Corresponding author)
  16. C. R. Yang, P. C. Fu, C. Cheng, M. J. Huang, "An integrated micro electro mechanical system based silicon wet etching process and nano carbon materials used for improving micro direct methanol fuel cells performance", Materials Today Energy, 20 (2021) 100696 (SCI) (JCR IF=9.257, Rank=21/119 (Q1)) (First author)
  17. Y. R. Jeng, A. E. Mendy, C. T. Ko, S. F. Tseng, and C. R. Yang, "Development of flexible triboelectric generators based on patterned conductive textile and PDMS layers", Energies, 14 (2021) 1391 (SCI) (SJR IF=0.598, Rank=17/111 (Q1)) (Corresponding author)
  18. J. H. Chang, S. Y. Chen, Y. L. Kuo, C. R. Yang, J. Z. Chen, "Carbon dioxide tornado-type atmospheric-pressure-plasma-jet-processed rGO-SnO2 nanocomposites for symmetric supercapacitors", Materials,14 (2021) 2777 (16 pp) (SCI) (JCR IF=3.623, Rank=17/80 (Q1))
  19. J. H. Chang, M. F. Lin, Y. L. Kuo, C. R. Yang, J. Z. Chen, "Flexible rGO-SnO2 supercapacitors converted from pastes containing SnCl2 liquid precursor using atmospheric-pressure plasma jet", Ceramics International, 47 (2021) 1651-1659 (SCI) (JCR IF=4.527, Rank=3/29 (Q1))
  20. C. R. Yang, C. D. Chen, C. Cheng, W. H. Shia, P. H. Chen, and T. P. Teng, "Synergistic effect of hybrid fillers/ polydimethylsiloxane composites on enhancing thermal conductivity", Case Studies in Thermal Engineering, 28 (2021) 101591 (SCI) (JCR IF=4.724, Rank=7/60 (Q1)) (First author)
  21. Y. F. Hung, C. Cheng, C. K. Huang, C. R. Yang, and S. F. Tseng, "Investigation of electrochemical reduction effects on graphene oxide powders for high performance supercapacitors", International Journal of Advanced Manufacturing Technology, 113 (2021) 1203–1213 (SCI) (SJR IF=0.946, Rank=53/345 (Q1)) (Corresponding author)
  22. A. Mondal, C. Y. Lee, H. Chang, P. Hasin, C. R. Yang, J. Y. Lin, "Electrodeposited Co0.85Se thin films as free-standing cathode materials for high-performance hybrid supercapacitors", Journal of the Taiwan Institute of Chemical Engineers, 121 (2021) 205-216 (SCI) (SJR IF=0.991, Rank=43/284 (Q1))
  23. C. R. Yang, C. D. Chen, C. Cheng, W. H. Shia, P. H. Chen, and T. P. Teng, "Thermal conductivity enhancement of AlN/PDMS composites using atmospheric plasma modification techniques", International Journal of Thermal Sciences, 155 (2020) 106431 (SCI) (JCR IF=3.744, Rank=31/133 (Q1)) (First author)
  24. C. H. Wu, Y. A. Lee, Y. J. Lai, J. Shieh, C. R. Yang, and C. C. Hsu, "Heat transfer enhancement of a multilayer graphene coating surface", Experimental Thermal and Fluid Science, 118 (2020) 110175 (SCI) (JCR IF=3.232, Rank=7/34 (Q1))
  25. C. R. Yang, C. W. Lu, P. C. Fu, C. Cheng, Y. C. Chiou, R. T. Lee, and S. F. Tseng, "Performance evaluation of μDMFCs based on porous-silicon electrodes and methanol modification", Energy, 192 (2020) 116666 (SCI) (JCR IF=7.147, Rank=3/60 (Q1)) (First author)
  26. C. C. Chang, J. F. Shih, Y. C. Chiou, R. T. Lee, S. F. Tseng, and C. R. Yang, " Development of textile-based triboelectric nanogenerators integrated with plastic metal electrodes for wearable devices", The International Journal of Advanced Manufacturing Technology, 104 (2019) 2633–2644 (SCI IF=2.601, Q1) (Corresponding author)
  27. T. P. Teng, S. C. Chang, Z. Y. Chen, C. K. Huang, S. F. Tseng, and C. R. Yang, " High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation", The International Journal of Advanced Manufacturing Technology, 104 (2019) 2751–2760 (SCI IF=2.601, Q1) (Corresponding author)
  28. Y. F. Hung, C. Cheng, C. K. Huang, and C. R. Yang, " A facile method for batch preparation of electrochemically reduced graphene oxide", Nanomaterials, (2019) 9, 376: doi:10.3390/nano9030376 (SCI) (Impact factor 3.504) (Corresponding author)
  29. C. R. Yang, S. F. Tseng and Y. T. Chen, " Laser-induced reduction of graphene oxide powders by high pulsed ultraviolet laser irradiations ", Applied Surface Science, 444(2018) 578–583 (SCI) (Impact factor 3.387) (First author)
  30. J. F. Shih, S. Y. Yang, C. C. Chang, and C. R. Yang, " Wearable sensors developed using a novel plastic metal material", Applied Physics A-Materials Science & Processing, (2018) 124:799 (SCI) (Impact factor 1.444) (Corresponding author)
  31. G. W. Hsieh, Z. R. Lin, C. Y. Hung, S. Y. Lin and C. R. Yang, " Graphene-induced enhancement of charge carrier mobility and air stability in organic polythiophene field effect transistors ", Organic Electronics, 54 (2018) 27–33 (SCI) (Impact factor 3.399)
  32. C. R. Yang, S. F. Tseng and Y. T. Chen, " Characteristics of graphene oxide films reduced by using an atmospheric plasma system ", Nanomaterials, (2018) 8, 802: doi:10.3390/nano8100802 (SCI) (Impact factor 3.504) (First author)
  33. S. Y. Yang, J. F. Shih, C. C. Chang, and C. R. Yang, " Development of high flexible triboelectric generators using plastic metal as electrodes ", Applied Physics A-Materials Science & Processing, (2017) 123:128 (SCI) (Impact factor 1.444) (Corresponding author)
  34. J. W. Wu, C. R. Yang, and C. Y. Huang, " Development of a novel plasma scanning technique for high-quality anodic bonding ", J. Micromech. Microeng., 26 (2016) 045005 (10pp)
  35. C. R. Yang, J. W. Wu, and L. Y. Chang, "Design and implementation of a novel conical electrode for fast anodic bonding", J. Micromech. Microeng., 24 (2014) 105003 (8pp)
  36. M. J. Huang, C. R. Yang, H. S. Lee, and H. L. Liu, "Fabrication of novel hybrid antireflection structures for solar cells", Solar Energy, 107 (2014) 489-494
  37. C.Y. Chan, Y. C. Chen, C. R. Yang, and T.M. Huang, "Effect of acid Etching durations on surface roughness and residual stresses of lightweight glass ceramic", Applied Mechanics and Materials, 284-287 (2013) 77-82
  38. C. R. Yang, T. P Teng, and Y. Y. Yeh, "Characterizations and process parameters of titanium dioxide thin film by sputtering", Journal of Nano Research, 22 (2013) 9-21
  39. H. C. Chien, C. R. Yang, L. L. Liao, C. K. Liu, M. J. Dai, R. M. Tain, and D. J. Yao, "Thermal conductivity of thermoelectric thick films prepared by electrodeposition", Applied Thermal Engineering, 51 (2013) 75-83
  40. Y. J. Chen, C. K. Chung, C. R. Yang, and C. R. Kao, "Single-joint shear strength of micro Cu pillar solder bumps with different amounts of intermetallics", Microelectronics Reliability 53 (2013) 47–52
  41. J. W. Wu, C. R. Yang, M. J. Huang, C. H. Yang, and C. Y. Huang, "Realization of ultrafast and high-quality anodic bonding using a non-contact scanning electrode", J. Micromech. Microeng., 23 (2013) 075008 (9pp)
  42. C. H. Yang, L. S. Kuo, P. H. Chen, C. R. Yang, and Z. M. Tsai, "Development of a multilayered polymeric DNA biosensor using radio frequency technology with gold and magnetic nanoparticles," Biosensors and Bioelectronics, 31(1) (2012) 349-356
  43. M. J. Huang, C. R. Yang, C. M. Chang, N. N. Chu, and M. H. Shiao, "Silicon vertical microstructure fabrication by catalytic etching", J. Micromech. & Microeng., 22 (2012) 085002 (12pp)
  44. Y. H. Tang, M. J. Huang, M. H. Shiao, and C. R. Yang, "Fabrication of silicon nanopillar arrays and application on direct methanol fuel cell", Microelectronics Engineering, 88(8)(2011) 2580-2583 (SCI)

  1. P. J. Wu, J. T. Hung, C. F. Hsieh, C. R. Yang, C. S. Yang, "Graphene-based tunable plasmonic metamaterials for nitric oxide in breath-sensing application", Proceedings of SPIE 12420- The International Society for Optical Engineering, Terahertz, RF, Millimeter, and Submillimeter-Wave Technology and Applications XVI 2023, San Francisco, USA, 30 Jan.-1 Feb., Paper ID: 124200F (2023)
  2. C. R. Yang, K. L. Wei, C. T. Lin, C. T. Lin, and R. R. Nien, "High flexible hydrogel-based piezoresistive pressure sensors", 2024 International Automatic Control Conference (CACS 2024), Longtan, Taoyuan, Taiwan, October 31-November 3, 2024, Paper ID: 1172 (2024)
  3. C. L. Lin, Y. J. Chen, P. J. Wu, C. R. Yang, C. S. Yang, "Terahertz metamaterials gas sensor based on ZIF-8/MoSe2 composite for NO2 detection", Proceedings of SPIE Photonics West - Oxide-based Materials and Devices XVI, San Francisco, USA, 25-30 Jan., Paper ID: 13367-25 (2025)
  4. C. Cheng, M. F. Lin, C. R. Yang, "Development of highly flexible and sensitive capacitive pressure sensors using a double-sided composite dielectric layer", 2023 International Conference on Advanced Robotics and Intelligent Systems, ARIS 2023, Taipei, Taiwan, August 30-September 1, 2023, Paper ID: 1146
  5. 沈新洋, 劉奕賢, 林辰騰, 宋文皓, 楊啓榮, "基於V2O5/MoS2複合材料之可撓性二氧化氮氣體感測器研製", 中國機械工程學會第四十一屆全國學術研討會, 高雄市, E1-004 (2024)
  6. 許濬麟, 鄭嘉, 鄭博文, 楊啓榮, "結合無線傳輸之複合PVDF與PTFE布基摩擦起電元件的研製", 中國機械工程學會第三十八屆全國學術研討會, 台南, E2-012 (2021)
  7. 洪敬庭, 魏鎧立, 楊啓榮, "整合ZnO/TiO2鈣鈦礦薄膜與兆赫超材料之氮氧化物感測器的開發", 中國機械工程學會第三十九屆全國學術研討會, 苗栗, E2-0007 (2022)
  8. 李昱樵, 陳信融, 鄭博文, 楊啟榮, "以固態電解質與多孔矽電極實現抗壓耐震型超級電容之技術開發", 中國機械工程學會第三十七屆全國學術研討會, 雲林, 0612 (2020)
  9. 許濬麟, 柯棋澤, 洪敬庭, 楊啟榮, "結合無線傳輸之布基摩擦起電元件的研製", 中國機械工程學會第三十七屆全國學術研討會, 雲林, 0429 (2020). (論文競賽第三名)
  10. 林明鋒, 洪敬庭, 鄭嘉, 楊啓榮, "具雙層介電層之可穿戴且高度靈敏的電容式壓力感測器研製", 中國機械工程學會第三十八屆全國學術研討會, 台南, E1-008 (2021)
  11. 林明鋒, 鄭嘉, 張宇蘋, 楊青青, 蕭文澤, 楊啟榮, "具微圓柱結構複合電紡纖維介電層之可穿戴、高穩定及高靈敏度的撓性電容式壓力感測器研製", 中國機械工程學會第三十七屆全國學術研討會, 雲林, 0162 (2020)
  12. 鄭博文, 楊啓榮, 黃兆溎, "以均苯四甲酸合成鈦金屬有機框架應用於二氧化氮感測器之研製", 中國機械工程學會第三十九屆全國學術研討會, 苗栗, E2-005 (2022)
  13. 張宇蘋, 陳家宏, 楊啓榮, "二硫化鉬/錳/鈷複合物之合成與應用於不對稱超級電容器之研製", 中國機械工程學會第三十九屆全國學術研討會, 苗栗, E2-006 (2022)
  14. 葉翔, 張智耀, 楊啓榮, "整合摩擦起電器與超級電容的自供電系統之研製", 中國機械工程學會第四十一屆全國學術研討會, 高雄市, E1-008 (2024)
  15. 林泱嶧, 林璟棠, 楊啓榮, "水熱法合成MXene(Ti3C2Tx)/SnS2 複合奈米碳管應用於超級電容之研製", 中國機械工程學會第四十一屆全國學術研討會, 高雄市, E1-005 (2024)
  16. 陳家宏, 楊啓榮, 林泱嶧, "CO2雷射誘導石墨烯複合MnO2/MoS2應用於超級電容器之研製", 中國機械工程學會第四十屆全國學術研討會, 彰化, E2-003 (2023)
  17. 黃兆溎, 楊啓榮, 沈新洋, "基於釩金屬有機框架衍生之五氧化二釩應用於可撓性二氧化氮感測器之研製", 中國機械工程學會第四十屆全國學術研討會, 彰化, E2-004 (2023)
  18. C. K. Huang, Z. Y. Chen, S. F. Tseng, C. R. Yang, "A novel electrochemical/mechanical exfoliation process for mass production of few-layer graphene using unique surfactants solution", The 4th International Conference on Machining, Materials and Mechanical Technologies (IC3MT2022), Taipei, Taiwan, November 11-14, Paper ID: 67 (2022)
  19. 鄭嘉, 葉翔 ,鄧敦平, 楊啓榮, "Cooling benefit evaluation of a central processing unit using thermal interface materials with hybrid additives", 中國機械工程學會第四十屆全國學術研討會, 彰化, E2-005 (2023)
  20. 李昱樵, 張宇蘋, 楊啓榮, "以均苯四甲酸合成雙金屬鎳-鈷金屬有機框架應用於不對稱超級電容器之研製", 中國機械工程學會第三十八屆全國學術研討會, 台南, E2-007 (2021). (論文佳作獎)

名稱 開始日期 結束日期 委託單位 編號 參與身份別
實現有效剝離暨還原石墨烯薄片之電化學插層/機械剪切複合製程技術開發 2024/10/01 2025/10/31 國科會 NSTC 113-2622-E-003-005 主持人
創新性釩金屬有機框架(V-MOF)材料的合成與應用於可撓性無線傳輸之二氧化氮感測器研製 2024/08/01 2025/07/31 國科會 NSTC 113-2221-E-003-002 主持人
具雙面多孔PDMS微陣列結構與PVDF/BaTiO3纖維複合介電層之可撓性高靈敏電容式壓力感測器研製 2023/11/01 2024/10/31 國科會 NSTC 112-2622-E-003-003 主持人
二硫化鉬/錳/鈷/奈米碳管複合材料之水熱法合成與其在不對稱超級電容器的應用 2023/08/01 2024/07/31 國科會 NSTC 112-2221-E-003-022 主持人
結合PVDF/PTFE微結構與無線傳輸之布基摩擦起電元件的研製 2022/11/01 2023/10/31 國科會 NSTC 111-2622-E-003-004 主持人
新型雙金屬鎳-鈷金屬有機框架奈米結構之合成暨應用於非對稱超級電容器的研製 2022/08/01 2023/07/31 國科會 MOST 111-2221-E-003-010 主持人
－CO2超臨界流體輔助剝離石墨烯薄片與應用於超級電容之 技術開發 2021/11/01 2022/10/31 科技部(原國科會) ：MOST 110-2622-E-003-005 - 主持人
CVD寡層石墨烯插層奈米碳之複合薄膜製備及其Z方向導熱性能評估 2021/08/01 2022/07/31 科技部(原國科會) MOST 110-2221-E-003-011 - 主持人
大氣電漿改質石墨烯應用於LED散熱塗料之開發 2020/11/01 2021/10/31 科技部(原國科會) MOST 109-2622-E-003-006 - 主持人
導電奈米纖維複合碳黑/石墨烯應用於具三維電極之鋁離子電池研製 2020/08/01 2021/07/31 國科會 MOST 109-2221-E-003-001 主持人
導電奈米纖維複合碳黑/石墨烯應用於具三維電極之鋁離子電池研製 2020/08/01 2021/07/31 科技部(原國科會) MOST 109-2221-E-003-001 主持人
微機電LIGA製程應用於微探針研製之技術開發 2019/11/01 2020/10/31 其他 108K0133 主持人
以陽極接合法靜電轉移圖案化石墨烯薄膜之技術開發 2019/11/01 2020/10/31 科技部(原國科會) MOST 108-2622-E-003-002-CC3 主持人
塑性金屬應用於具自供電/無線傳輸之穿戴式壓力感測器研製 2019/08/01 2020/07/31 科技部(原國科會) MOST 108-2221-E-003 -013 主持人
陶瓷顆粒/石墨烯/PDMS複合之熱界面材料開發 2018/11/01 2019/10/31 科技部(原國科會) MOST 107-2622-E-003-005 -CC3 主持人
具多孔矽結構/石墨烯/RuO2複合電極之抗壓耐震型超級電容的開發 2018/08/01 2019/07/31 科技部(原國科會) MOST 107-2221-E-003-010 主持人
石墨烯散熱塗料於LED性能提升之技術開發 2018/02/01 2018/11/30 其他政府部門 CSIST-497-V405 (107) 主持人
修飾PtRu奈米顆粒之石墨烯應用於染料敏化太陽能電池的研製 2017/11/01 2018/10/31 科技部(原國科會) MOST 106-2622-E-003-005 -CC3 主持人
以液體/塑性金屬電極實現高撓性摩擦起電器之研製 2017/08/01 2018/07/31 科技部(原國科會) MOST 106-2221-E-003-013 主持人
石墨烯散熱塗料製備技術 2017/02/15 2017/12/31 其他政府部門 CSIST-497-V306 (106) 主持人
多重技術整合之微機電式μDMFC開發與性能評估 2016/11/01 2017/10/31 科技部(原國科會) MOST 105-2622-E-003-007 -CC3 主持人
整合UV-LIGA與靜電紡絲製程之具三維電極板/奈米碳纖維的超級電容器 2016/08/01 2017/07/31 科技部(原國科會) MOST 105-2221-E-003-004 主持人
電解法石墨烯薄片試製及性能評估 2016/04/01 2016/11/30 其他 EEA0413014 主持人
石墨烯導熱膠材製備技術 2016/01/26 2016/12/31 其他政府部門 CSIST-497-V208 (105) 主持人
SOI晶片應用於具矽奈米線之微型熱電致冷晶片的研製 2015/08/01 2016/07/31 科技部(原國科會) MOST 104-2221-E-003-005 主持人
常壓電漿輔助之陽極接合技術開發 2014/11/01 2015/10/31 國科會 MOST 103-2622-E-003-002 -CC3 主持人
常壓電漿之雙疏薄膜沉積與應用於LED封裝的微透鏡陣列開發 2014/08/01 2015/07/31 國科會 MOST 103-2221-E-003-003 主持人
新型濕式垂直蝕刻技術開發應用於半導體材料 2014/08/01 2015/07/31 國科會 MOST 102-2221-E-003 -031 -MY2 主持人
應用於矽晶太陽能電池之微/奈米複合抗反射結構製作 2013/11/01 2014/10/31 國科會 NSC 102-2622-E-003 -002 -CC3 主持人
甲醇燃料改質與微/奈米結構雙極板應用於μDMFC 性能之提升 2013/08/01 2014/07/31 國科會 NSC 102-2221 -E-003 -004 主持人
常壓電漿應用於多層玻璃陽極接合技術之開發 2012/11/01 2013/10/31 國科會 NSC 101-2622-E-003 -003 -CC3 主持人
網印式厚膜熱電3D多層微發電元件之研製 2012/08/01 2013/07/31 國科會 NSC 101 -2221-E-003 -003 主持人
準直性奈米碳管合成暨其在微型甲醇燃料電池之應用 2011/11/01 2012/10/31 國科會 NSC 100-2622-E-003 -003-CC3 主持人
類微機電製程應用於微型Bi-Te-Se熱電產生器之研製 2011/08/01 2011/07/31 國科會 NSC 100-2221-E-003 -001 主持人
具銅合金/銅複合層電鑄基材之高功率VLED 製程技術開發 2010/10/01 2011/09/30 國科會 99RA12 主持人
氧化鋅奈米柱應用於異質/同質接面結構之發光二極體研製 2010/08/01 2011/07/31 國科會 NSC 99-2221-E-003 -004 主持人
電弧放電應用於陽極接合速度與品質之研究 2010/06/01 2011/05/31 國科會 NSC 99-2622-E-003 -004 -CC3 主持人
具次波長抗反射結構陣列之高效能太陽能電池研製 2009/08/01 2010/07/31 國科會 NSC 98-2221-E-003 -004 主持人
濕式矽蝕刻技術應用於微型直接甲醇燃料電池之研製 2009/07/01 2010/06/30 國科會 NSC 98-2622-E-003 -002 -CC3 主持人
新型熱電材料製備技術應用於微型致冷器之研製 2008/08/01 2009/07/31 國科會 NSC 97-2221-E-003-002 主持人
界面活性劑運用於增進LED光萃取效率之表面粗化蝕刻技術開發 2008/08/01 2009/07/31 國科會 NSC 97-2622-E-003 -002 -CC3 主持人
精密電鑄應用於微圖化耐高溫彩色濾光片製程開發 2007/11/01 2008/10/31 國科會 NSC 96-2622-E-003 -003 -CC3 主持人
奈米級結構陣列製作技術應用於高效能電池元件之研製 2007/08/01 2008/07/31 國科會 NSC 96-2221-E-003 -009 主持人
微機電LIGA製程之銅合金電鑄技術開發 2006/11/01 2007/10/31 國科會 NSC 95-2622-E-003 -006 -CC3 主持人
複合量子點合成之玻璃反應晶片開發 2006/08/01 2007/07/31 國科會 NSC 95-2221-E-003 -001 主持人
整合光輔助電化學蝕刻與微電鑄技術應用於高密度垂直金屬微柱狀陣列之研製 2005/11/01 2006/10/31 科技部(原國科會) NSC 94-2622-E-003-003-CC3 主持人
應用於硒化鎘奈米微粒合成之整合式微反應晶片研製 2005/08/01 2006/07/31 國科會 NSC 94-2212-E-003-001 主持人
具高壓暨高溫控制之快速溼式矽蝕刻設備與製程開發 2004/11/01 2005/10/31 科技部(原國科會) NSC 93-2622-E-003-002-CC3 主持人
高分子感光型PVDF壓電薄膜製備與CMOS積體化之紅外線熱像感測器研製 2004/08/01 2005/07/31 國科會 NSC 93-2212-E-003-002 主持人
界面活性劑運用於微機電製程之異方性溼式矽蝕刻技術開發 2003/12/01 2004/11/30 科技部(原國科會) NSC 92-2622-E-003-002-CC3 主持人
高深寬比光輔助電化學蝕刻技術應用於微光開關之研製 2003/08/01 2004/07/31 科技部(原國科會) NSC 92-2212-E-003-002 主持人
微機電LIGA製程之Ni - Co -TiO2合金電鑄技術開發 2002/12/01 2003/11/30 科技部(原國科會) NSC 91-2622-E-003-003-CC3 主持人
低成本厚膜光阻製程於微機構驅動式光學開關之研製 2002/08/01 2003/07/31 科技部(原國科會) NSC 91-2218-E-003-001 主持人
類LIGA製程應用於靜電式微馬達光開關之研製 2001/08/01 2002/07/31 科技部(原國科會) NSC 90-2218-E-003-001 主持人