1. S.T. Chen*, W.J. Chiu, C.H. Chiu, Same-spot micro-ECM based on constant-accelerated movement of the electrode. Materials and Manufacturing Processes, 2024, DOI: 10.1080/10426914.2024.2311394, (SCI)
  2. S.T. Chen*, P. Lo, C.H. Hu, A hybrid process technology of SiC die separation. Materials and Manufacturing Processes, 2024, DOI: 10.1080/10426914.2024.2311386, (SCI)
  3. S.T. Chen*, W.J. Huang, Development of a BDD end-grinding-milling tool with dual-negative rake angle. Materials and Manufacturing Processes, 2023, DOI: 10.1080/10426914.2023.2290236, (SCI)
  4. S.T. Chen*, J.P. Guo, Reconditioning of diamond dicing blades via electrolytic dressing. Journal of Materials Processing Technology, 2022, 311, 117801-13, (SCI).
  5. C.T. Huang, S.T. Chen*, A co-axial indirect transfer printing process technology applied to the production of flexible serpentine silver micro-nanowires. Journal of Materials Processing Technology, 2023, 317, 117970-13, (SCI)..
  6. S.T. Chen*, S.Y. Chen, Development of a high-frequency discharge power source with non-equal energy relaxation oscillator circuit applied to β-Ga2O3 microstructure array w-EDMing. International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, 10(6), 1511-1528, (SCI).
  7. S.T. Chen, Kai-Chieh Yang, Semi-ductile cutting regime technology for machining Zerodur glass-ceramic microstructures, Precision Engineering, 2022, 74, 99-109, (SCI).
  8. S.T. Chen, P.A. Lin, C.J. Chiang, A high-frequency electromagnetic stamping system for high-throughput stamping of microdimples, Journal of Materials Processing Technology, 2022, 303, 117527-12, (SCI).
  9. S.T. Chen*, C.J. Chiang, P.A. Lin, C.T. Huang, Efficient electromagnetic micropunching technology for producing well-ordered, high-density micropits. Materials and Manufacturing Processes, 2022, https://doi.org/10.1080/10426914.2022.2075887, (SCI).
  10. S.T. Chen, L.W. Huang, A micro-energy w-EDM power source based on high-frequency spark erosion for making diamond heat-sink array, International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 17pp. (SCI).
  11. S.T. Chen, C.T. Huang, M.Y. Zheng, H.Y Yen, Co-shaft in-situ rolling-imprinting technique for printing of silver micro-nanowire array, Journal of Materials Processing Technology, 2022, 299, 117387-14, (SCI).
  12. S.T. Chen, C.C. Chen, S.Y. Shih, Efficient microspark erosion-assisted machining of a monocrystalline microdiamond stylus using a heat-avoidance path, Precision Engineering, 2021, 72, pp.426-436, (SCI).
  13. S.T. Chen, W.Y. Jhou, Dual-crankshaft out-of-phase balanced drive mechanism applied to high-frequency scraping of high-density microcavities patterns, International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 8 (4), 1163-1180, (SCI).
  14. S.T. Chen, Y.Y. Chen, Microgroove grinding of monocrystalline diamond using medium-frequency vibration-assisted grinding with self-sensing grinding force technique, Journal of Materials Processing Technology, 2020, Vol.282, 116686-14, (SCI).
  15. S.T. Chen, C.H. Chen, C.H. Chang, Study of high-frequency microspark-erosion of boron-doped polycrystalline diamond, Diamond & Related Materials, 2019, Vol.94, pp.155-161, (SCI).
  16. S.T. Chen, L.W. Huang, J.P. Kuo, T.C. Pai, Development of an original electromagnetic damping-controlled horizontal cutting mechanism for microwire-EDM, Journal of Materials Processing Technology, 2020, Vol.278, 116538-9, (SCI).
  17. S.T. Chen, Y.H. Tung, J.R. Jiang, A novel surface microtexture array generation approach using a fast-tool-feeding mechanism with elliptical cam drive, Journal of Materials Processing Technology, 2018, Vol.255, pp.252-262, (SCI).
  18. S.T. Chen, S.M. Lin, Development of a capacitive sensing technology for the measurement of perpendicularity in the narrow, deep slot-walls of micromolds, Microelectronics Reliability, 2018, Vol.83, pp.216-222, (SCI).
  19. S.T. Chen, S.W. Yang, A high-density, super-high-aspect-ratio microprobe array realized by high-frequency vibration assisted inverse micro w-EDM, Journal of Materials Processing Technology, 2017, Vol.250, pp.144-155, (SCI).
  20. S.T. Chen, C.H. Chen, Development of a novel micro w-EDM power source with a multiple Resistor-Capacitor (mRC) relaxation circuit for machining high-melting point, -hardness and -resistance materials, Journal of Materials Processing Technology, Vol.240, 2017, pp.370-381, (SCI).
  21. S.T. Chen, C.Y. Chu, Fabrication and testing of a novel biopotential electrode array, Journal of Materials Processing Technology, 2017, Vol.250, pp.345-356, (SCI).
  22. S.T. Chen, M.C. Yeh, Development of an in-situ high-precision micro-hole finishing technique, Journal of Materials Processing Technology, Vol.229, 2016, pp.253-264, (SCI).
  23. S.T. Chen, C.H. Chen, A novel power source for high precision, highly efficient micro w-EDM, Journal of Micromechanics and Microengineering, Vol.25, No.7, 2015, 12pp, (SCI).
  24. S.T. Chen, Z.H. Jiang, A force-controlled grinding-milling technique for quartz-glass micromachining, Journal of Materials Processing Technology, Vol.216, 2015, pp.206-215, (SCI).
  25. S.T. Chen, Y.C. Lai, A hybrid process of raining co-deposition and rotary wire spark erosion in the development of a custom CBN tool for making a biochip injection mold, Journal of Materials Processing Technology, Vol.214, 2014, pp.2784-2795, (SCI).
  26. S.T. Chen, C.H. Chang, Successful fabrication of a convex platform PMMA cell-counting slide using a high-precision perpendicular dual-spindle CNC machine tool, Journal of Micromechanics and Microengineering, Vol.23, No.12, 2013, pp.125030-125042, (SCI).
  27. S.T. Chen, C.C. Liu, C.Y. Fu, Study of a high-efficiency, -precision, one-shot OCA dispensing technique, Journal of Materials Processing Technology, Vol.213, 2013, pp.1059-1067, (SCI).
  28. S.T. Chen, C.H. Chang, Development of an ultrathin BD-PCD wheel-tool for in-situ microgroove generation on NAK80 mold steel, Journal of Materials Processing Technology, Vol.213, 2013, pp.740-751, (SCI).
  29. S.T. Chen, A.W.J. Hsue, T.S. Luo Fabrication of Mass Micro-Holes Using the Hybrid Precision Extruded-Wax Electroforming and Micro-EDM Processes, Journal of the Chinese Society of Mechanical Engineers, 2012, Vol.33, No.4, pp.349-356, (SCI).
  30. S.T. Chen, C.H. Chang, Study on thinning of a boron-doped polycrystalline diamond wheel-tool by micro rotary w-EDM approach, Applied Mechanics and Materials, Vols.217-219, 2012, pp.2167-2170, (EI).
  31. S.T. Chen, Y.C. Lai, Study of the processing properties of a nickel-based diamond film in the development of a miniature circular diamond-blade array, Surface and Coatings Technology, Vol.207, pp.334-342, 2012, (SCI).
  32. S.T. Chen, Y.C. Lai, Development of micro co-axial diamond wheel-tool array using a hybrid process of electrochemical co-deposition and RWEDM technique, Journal of Materials Processing Technology, Vol.212, 2012, pp.2305-2314, (SCI).
  33. S.T. Chen, Y.C. Lai, Development of a novel custom micro-tool for effective cutting of a precision microgroove array on a microscope slide, Journal of Micromechanics and Microengineering, Vol.21, No.3, 2011, 8pp, (SCI).
  34. S.T. Chen, S.J. Lin, Development of an extremely thin grinding-tool for grinding microgrooves in optical glass, Journal of Materials Processing Technology, Vol.211, 2011, pp.1581-1589, (SCI).
  35. S.T. Chen, Y.C. Lai, Development of a Multiple Micro Diamond Wheel-tools, Key Engineering Materials Vol. 487, 2011, pp.160-163, (EI).
  36. S.T. Chen, Z.H. Jiang, Y.Y. Wu and H.Y. Yang, Development of a grinding-drilling technique for holing optical grade glass, International journal of machine tools & manufacture, Vol. 51, 2011, pp.95-103, (SCI).
  37. S.T. Chen, Development of a low-cost composite film technique for functional micro-tools, Thin Solid Films, Vol.519, 2011, pp.4742-4748, (SCI).
  38. S.T. Chen, H.Y. Yang, Study of micro-electro discharge machining (micro-EDM) with on-machine measurement-assisted techniques, Measurement Science & Technology, Vol.22, No.6, 2011, 065702 (8pp), (SCI).
  39. S.T. Chen, S.J. Lin, Study of an on-line precision microgroove generating process on silicon wafer using a developed ultra-thin diamond wheel-tool, Diamond & Related Materials, Vol.20, 2011, pp.339-342, (SCI).
  40. S.T. Chen, T.S. Luo, Development of a high-precision, wear-resistant micro-holes structure, Journal of Materials Processing Technology, Vol.211, 2011, pp.285-293, (SCI).
  41. S.T. Chen, T.S. Luo, Fabrication of micro-hole arrays using precision filled wax metal deposition, Journal of Materials Processing Technology, Vol.210, 2010, pp.504-509, (SCI).
  42. S.T. Chen, Z.H. Jiang, Y.Y. Wu, H.Y. Yang, Development of a reverse micro EDM-drilling for holing diamond-tool, Advanced Materials Research, Vols. 126-128, 2010, pp802-807, (EI).
  43. S.T. Chen, M.C. Yeh, Development and application of a micro-honing-tool, Advanced Materials Research, Vols. 76-78, 2009, pp189-194, (EI).
  44. S.T. Chen, H.Y. Yang, C.W. Du, Study of an ultrafine w-EDM technique, Journal of Micromechanics and Microengineering, Vol.19, No.11, 2009, pp.115033-115040, (SCI).
  45. S.T. Chen, M.Y. Tsai, Y.C. Lai, C.C. Liu, Development of a micro diamond grinding tool by compound process, Journal of Materials Processing Technology, Vol.209, 2009, pp.4698-4703, (SCI).
  46. M.Y. Tsai, S.T. Chen, Y.S. Liao, J. Sung. Novel diamond conditioner dressing characteristics of CMP polishing pad, International journal of machine tools & manufacture, Vol.49, 2009, pp.722-729, (SCI).
  47. S.T. Chen, H.C. Su, Y.S. Liao, H.Y. Yang, Y.C. Tasi, Development of super high slenderness ratio micro channels using precision filled wax electroforming, Journal of the Chinese Society of Mechanical Engineers, 2008, Vol.29, No.4, pp.317-323, (SCI).
  48. S.T. Chen, Fabrication of a high-density micro holes by upward batch micro EDM, Journal of Micromechanics and Microengineering, Vol.18, No.8, 2008, pp.85002-85010, (SCI).
  49. S.T. Chen, Y.C. Lai, C.C. Liu, S.H. Wang, Development of micro diamond grinding tool with micro EDM and composite electroforming, Journal of the Chinese Society of Mechanical Engineers, 2008, Vol.29, No.5, pp.397-404, (SCI).
  50. S.T. Chen, Y.C. Lai and C.C. Liu, Fabrication of a miniature diamond grinding tool using a hybrid process of micro-EDM and co-deposition, Journal of Micromechanics and Microengineering, Vol.18, No.5, 2008, pp.55005-55012, (SCI).
  51. S.T. Chen, A high-efficiency approach for fabricating mass micro holes by batch micro EDM, Journal of Micromechanics and Microengineering, Vol.17, No.10, 2007, pp.1961-1970, (SCI).
  52. S.T. Chen, Y.S. Liao, C.S. Lin, Development of the integrated micro machining system, Journal of the Chinese Society of Mechanical Engineers, 2008, Vol.27, No.6, pp.619-625, (SCI).

  1. S.T. Chen, L.W. Huang, J.P. Kuo, T.C. Pai, Development of an original electromagnetic damper for microwire tension control in w-EDM. The 2020 11th International Conference on Mechatronics and Manufacturing (ICMM 2020), Chuo University, Tokyo, Japan, 2020, (6pp).
  2. S.T. Chen, C.H. Chang, Study on high-frequency spark erosion of boron-doped polycrystalline diamond, The 29th International Conference on Diamond and Carbon Materials, Valamar Lacroma Dubrovnik, Dubrovnik, Croatia, 2018, (6pp).
  3. S.T. Chen, M.C. Yeh, An in-situ high-cylindricity micro-hole finishing technique, The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 2017), Hiroshima, Japan, 2017, (6pp).
  4. S.T. Chen, C.C. Chen, S.Y. Shih, Efficient formation of a monocrystalline diamond probe with 1µm tip-radius by using spark-induced graphitization-assisted technique, The 5th Annual Conference on Engineering and Information Technology (ACEAIT 2017), Nagoya, Japan, 2017, (8pp).
  5. S.T. Chen, W.Y. Chou, Study of surface microtexture arrays generation by using linkage drive mechanism, The 5th Annual Conference on Engineering and Information Technology (ACEAIT 2017), Nagoya, Japan, 2017, (9pp).
  6. S.T. Chen, C.H. Chang, L.W. Huang, A high-speed & fast-shallow grinding technique for microgrooves generation on mold steel, 2017 World Congress on Micro and Nano Manufacturing (WCMNM 2017), Kaohsiung, Taiwan, 2017, (2pp).
  7. S.T. Chen, S.M. Lin, Development of a capacitive sensing technology for the measurement of perpendicularity in the narrow, deep slot-walls of micromolds, the 2016 International Electron Devices and Materials Symposium (IEDMS 2016), Taipei, Taiwan, 2016, (11pp).
  8. S.T. Chen, Y.H. Tung, Development and Application of a Reciprocating Feed System with Oval Cam-drive, The 19th International Symposium on Advances in Abrasive Technology (ISAAT 2016), Kungsholmen, Stockholm, Sweden, 2016, (5pp).
  9. S.T. Chen, C.Y. Chu, Development of a laboratory-designed micro-invasive brainwave electrodes array. The 32nd World Congress of the International Federation of Biomedical Laboratory Science (IFBLS 2016), Kobe, Japan, 2016, (20pp).
  10. S.T. Chen, C.T. Huang, Development of a novel hybrid roll-to-roll imprinting system for in-situ making nanoscale silver wire array, The 5th International Congress on Engineering and Information (ICEAI 2016), Osaka, Japan, 2016, (6pp).
  11. S.T. Chen, P.T. Lin, Study on a micro multilevel aspheric Fresnel lens array fabrication, The 5th International Congress on Engineering and Information (ICEAI 2016), Osaka, Japan, 2016, (4pp).
  12. S.T. Chen, S.Y. Shih, Development of a high-precision CNC grinding machine and study of a mono crystalline diamond probe grinding for measurement of surface roughness, The 5th International Congress on Engineering and Information (ICEAI 2016), Osaka, Japan, 2016, (2pp).
  13. S.T. Chen, C.H. Chen, A pluri Resistance-Capacitance (pRC) circuit for highly efficient micro w-EDM, ISPlasma 2016/IC-PLANTS2016 8th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials and 9th International Conference on Plasma-Nano Technology & Science (ISPlasma 2016), Nagoya, Japan, 2016, (16pp).
  14. S.T. Chen, Z.H. Jiang, Development of an intellectualized grinding-milling technique for quartz-glass micromachining, The 13th International Conference on Automation Technology (Automation 2015), Taipei, Taiwan, 2015, (6pp).
  15. S.T. Chen, Z.H. Jiang, A self-regulating feed-rate machine tool for quartz glass, the 8th International Conference on Leading Edge Manufacturing in 21st Century, (LEM21 2015), Kyoto, Japan, 2015, (6pp).
  16. S.T. Chen, C.Y. Hung, Y.D. Chen, Y.C. Chung, Development of a reverse batch micro w-EDM technique with high-frequency vibration assisted machining, The 4th International Congress on Engineering and Information (ICEAI 2015), Kyoto, Japan, 2015, (2pp).
  17. S.T. Chen, S.Y. Shih, Development of a Micro Diamond Tool by Using the Laboratory-Designed High-Precision CNC Machine Tool, The 4th International Congress on Engineering and Information (ICEAI 2015), Kyoto, Japan, 2015, (3pp).
  18. S.T. Chen, C.H. Chen, Development of a novel RC relaxation circuit for micro w-EDM, The 4th International Congress on Engineering and Information (ICEAI 2015), Kyoto, Japan, 2015, (2pp).
  19. S.T. Chen, Y.H. Tung, Development of a high-speed reciprocating feeding device with mechanically driven, The 4th International Congress on Engineering and Information (ICEAI 2015), Kyoto, Japan, 2015, (5pp).
  20. S.T. Chen, W.P. Huang, H.Y. Yang, M.C. Yeh, C.W. Du, An in-situ integrated micromachining system for intricate micro-parts machining, The XI International Conference on Precision Engineering and Nanotechnology (ICPEN 2014), Penang, Malaysia, 2014, pp.174-180.
  21. S.T. Chen, M.J. Twu, C.Y. Su, S. D. Wu, Development of an intellectualized symmetric high-speed dual-spindle grinding machine and study on LED probe speedy grinding, 2014, Workshop on Advanced Intelligent Automation Technology, 2014 IEEE International Conference on Automation Science and Engineering (IEEE CASE 2014), (10pp).
  22. S.T. Chen, S.M. Lin, Study of a capacitive sensing technology for the measurement of perpendicularity of narrow-deep slot in precision mold, euspen's 14th International Conference of the European Society for precision Engineering & Nanotechnology (EUSPEN 2014), Dubrovnik, Croatia, 2014, pp.312-315.
  23. S.T. Chen, W.P. Huang, Development of a cost-effective tabletop machine tool for machining micro aspheric lighting lens mold, Technical digest of 9th International Conference on Optics-Photonics Design & Fabrication, (ODF’14), Itabashi, Tokyo, 2014, pp.249-250.
  24. S.T. Chen, C.W. Du, and W.P. Huang, A micrometre-grating array generation technique using a balanced-weights rotating fly-cutter mechanism, Technical digest of 9th International Conference on Optics-Photonics Design & Fabrication, (ODF’14), Itabashi, Tokyo, 2014, pp.247-248.
  25. S.T. Chen, C.H. Chang, Development of a thin BD-PCD wheel-tool and research of a microscopy examination biochip-mold fabrication, Proceedings of the 6th Zhengzhou International Superhard Materials & Related Products Conference, (ZISC 2013), Zhengzhou, Henan, China, 2013, pp.121-127.
  26. S.T. Chen, C.H. Chang, Development of a high-precision hybrid CNC machine tool for in-situ fabricating a biomedical-slide mold, the 7th International Conference on Leading Edge Manufacturing in 21st Century, (LEM21 2013), Matsushima, Miyagi 2013, (6pp).
  27. S.T. Chen, C.H. Chang, Development of a micro boron-doped polycrystalline diamond wheel-tool, 22nd European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides (Diamond 2011), Garmisch-Partenkirchen, Germany, 2011, (6pp).
  28. S.T. Chen, Y.C. Lai, Development of a multiple micro diamond wheel-tools, 16th Chinese Conference of Abrasive Technology (CCAT 2011), Xinjiang, China, 2011, (5pp).
  29. S.T. Chen, W.P. Huang, C.W Du, S.M. Li, Development of a low‐cost, high‐precision tabletop gantry machine tool for machining micro V‐groove arrays, 14th International Conference on Advances in Materials and Processing Technologies (AMPT 2011), Istanbul, Turkey, 2011, (6pp).
  30. S.T. Chen, S.J. Lin, Study of an on-line precision microgroove generating process on optical glass using a developed ultra-thin diamond wheel-tool, 21st European Conference on Diamond, Diamond-Like Materials (Diamond 2010), Carbon Nanotubes, and Nitrides, Budapest, Hungary, 2010, (6pp).
  31. S.T. Chen, T.S. Luo, A novel hybrid process for fabricating the micro holes array, Proceedings of the 16th International Symposium on Electromachining (ISEM 2010), Shanghai, China, 2010, pp.501-506.
  32. S.T. Chen, Development of a low-cost composite film technique for functional micro-tools, Proceedings of the 5th International Conference on Technological Advances of Thin Films & Surface Coatings (ThinFilms 2010), Harbin, China, 2010, (13pp).
  33. S.T. Chen, H.Y. Yang, C.W. Du, The research of micro w-EDM technique using the ultrafine tungsten wire, 12th International Conference on Advances in Materials and Processing Technologies (AMPT 2009), Kuala Lumpur, Malaysia, 2009, (11pp).
  34. S.T. Chen, M.C. Yeh, Development and application of a micro-honing-tool, The International Symposium on Advances in Abrasive Technology (ISAAT 2009) at Gold Coast, Australia, 2009, Advances in Abrasive Technology XII, pp189-194.

名稱 開始日期 結束日期 委託單位 編號 參與身份別
超精密共軸線上轉印系統開發應用於超細長曲線型微奈米銀導線電路陣列成形研究(3/3) 2024/08/01 2025/07/31 國科會 MOST 111-2221-E-003 -021 -MY3 主持人
超精密共軸線上轉印系統開發應用於超細長曲線型微奈米銀導線電路陣列成形研究(2/3) 2023/08/01 2024/07/31 國科會 MOST 111-2221-E-003 -021 -MY3 主持人
基於產業實務的放電加工波形設計融入於第三代半導體材料加工之教學實踐 2023/08/01 2024/07/31 教育部 PEE1120282 主持人
次世代CNC線切割放電加工機之精度改善研究(2/4) 2023/06/01 2024/05/31 國科會 NSTC 112-2218-E-003-001 總主持人
先進柴油引擎噴嘴製造技術之新人養成教育研究 2022/08/01 2023/07/31 教育部 PEE1110011 主持人
超精密共軸線上轉印系統開發應用於超細長曲線型微奈米銀導線電路陣列成形研究(1/3) 2022/08/01 2023/07/31 國科會 MOST 111-2221-E-003 -021 -MY3 主持人
次世代CNC線切割放電加工機之精度改善研究(1/4) 2022/06/01 2023/05/31 國科會 MOST 111-2218-E-003-001 總主持人
精微元件CNC線切割放電加工技術之教學精進研究 2021/08/01 2022/07/31 教育部 PEE1100800 主持人
高密度微能量電源系統開發應用於超硬材料高深寬比精微結構批量式加工研究(2/2) 2021/08/01 2022/07/31 國科會 MOST 109-2221-E-003 -008 -MY2 主持人
創新式精微線上滾印系統開發之閤題導向學習(PBL)課程教學研究 2020/08/01 2021/07/31 教育部 PEE1090486 主持人
高密度微能量電源系統開發應用於超硬材料高深寬比精微結構批量式加工研究(1/2) 2020/08/01 2021/07/31 國科會 MOST 109-2221-E-003 -008 -MY2 主持人
精密機械與機電産業先進技術設計與應用 2020/07/01 2021/08/31 國科會 科技部109年5 月11 日部授竹企字第1090013335號 主持人
教學實踐研究計畫(基於工業4.0 之「智能化教學系統建構」研究與實踐−以「矽晶圓晶粒分割系統」為例 2019/08/01 2020/07/31 教育部 PEE1080110 主持人
具自動線上銳化技術之智能高速晶粒分割系統開發 2019/08/01 2020/07/31 國科會 MOST 108-2221-E-003-012 主持人
一種線上高頻淺層改質輔助製程之高精密研削系統開發應用於單晶鑽石工具快速成形研究(2/2) 2018/08/01 2019/07/31 國科會 MOST 106-2221-E-003 -017 -MY2 主持人
一種線上高頻淺層改質輔助製程之高精密研削系統開發應用於單晶鑽石工具快速成形研究(1/2) 2017/08/01 2018/07/31 國科會 MOST 106-2221-E-003 -017 -MY2 主持人
高剛性類快刀伺服系統開發與高密度陣列微坑結構之高頻切削研究(2/2) 2016/08/01 2017/07/31 國科會 MOST 104-2221-E-003 -002 -MY2 主持人
高剛性類快刀伺服系統開發與高密度陣列微坑結構之高頻切削研究(1/2) 2015/08/01 2016/07/31 科技部(原國科會) MOST 104-2221-E-003 -002 -MY2 主持人
高速高精度錯置式雙軸精微複合切削系統開發與多焦點高階精微非球面(2/2) 2015/08/01 2016/07/31 科技部(原國科會) MOST 103-2221-E-003 -004 -MY2 主持人
智能化對稱高速雙主軸研磨機開發與LED探針快速研削成形研究(2/2) 2014/08/01 2015/07/31 國科會 NSC 102-2218-E-003-001-MY2 總主持人
高速高精度錯置式雙軸精微複合切削系統開發與多焦點高階精微非球面(1/2) 2014/08/01 2015/07/31 科技部(原國科會) MOST 103-2221-E-003 -004 -MY2 主持人
高精密複合式設備系統開發與高密度超高細長比精微陣列式3D-IC探針製作技術研究(2/2) 2013/08/01 2014/07/31 國科會 NSC 101-2221-E-003 -001 -MY2 主持人
智能化對稱高速雙主軸研磨機開發與LED探針快速研削成形研究(1/2) 2013/08/01 2014/07/31 國科會 NSC 102-2218-E-003-001-MY2 總主持人
高精密複合式設備系統開發與高密度超高細長比精微陣列式3D-IC探針製作技術研究(1/2) 2012/08/01 2013/07/31 國科會 NSC 101-2221-E-003 -001 -MY2 主持人
高精密陣列式光學膠塗佈系統開發 2012/06/01 2013/05/31 國科會 NSC 101-2622-E-003 -001 -CC3 主持人
低成本超精密加工機開發與晶圓級光學模具陣列製造研究(2/2) 2011/08/01 2012/07/31 國科會 NSC99-2221-E-003-002-MY2 主持人
創新型高精密突台式尿沉渣鏡檢晶片模具開發(2/2) 2010/12/01 2011/11/30 國科會 NSC99-2621-E-003-002-CC2 主持人
低成本超精密加工機開發與晶圓級光學模具陣列製造研究(1/2) 2010/08/01 2011/07/31 國科會 NSC99-2221-E-003-002-MY2 主持人
創新型高精密突台式尿沉渣鏡檢晶片模具開發(1/2) 2009/12/01 2010/11/30 國科會 NSC98-2622-E-003-006-CC2 主持人
小型複合製造系統開發與顯微鏡檢模製作技術研究 2009/08/01 2010/07/31 國科會 NSC98-2221-E-003-002- 主持人
高精密複合中心機開發與血液細胞技術晶片模具製作 2008/08/01 2009/07/31 國科會 NSC97-2221-E-003-001 主持人
棋盤式血球計之高硬度熱壓模具開發 2008/08/01 2009/07/31 國科會 NSC97-2622-E-003-001-CC3 主持人
粒徑0-2µm電鑄立方晶氮化硼搪研工具開發 2007/11/01 2008/10/31 國科會 NSC96-2622-E-003-004-CC3 主持人
粒徑1μm之電鑄鑽石搪研工具開發 2006/11/01 2007/10/31 國科會 NSC95-2622-E-003-005-CC3 主持人
精密微型CNC晶粒分割機研發與厚度10μm微電鑄鑽石刀具製作技術研究 2006/08/01 2007/07/31 國科會 NSC95-2218-E-003-001- 主持人